 |
 |
 |
 |
|
||||||||||
Oiling Instructions |
|||||||||||
| The pictures below show oiling locations for all models. Two of the oil ports are capped with stainless steel spheres. The container of oil included with your machine has a thin brass tube affixed to the mouth. Use this tube to push down on the sphere to direct the oil flow into the port. | |||||||||||
 |
On the bobbin winder side, there are two oiling points. The picture to the left shows oiling points for the Classic and Optimum models. |
||||||||||
 |
Premier models do not have the oil port under the motor but instead have a brass oil pot located above and slightly to the left of the bobbin winder tension device as indicated by the gray rectangle in the photo at left. |
||||||||||
 |
Three oil ports are located on top of the upper arm as show at left. |
||||||||||
 |
One oil port is located on the lower arm just behind the throat plate. The final oil location is in the hook race which houses the bobbin case. |
||||||||||
 |
|||||||||||
|
|||||||||||
